Can a pool table go out without being taken apart?

Not out of a house. Angi says a table can stay assembled only for a short move, like one room to the next, with several people lifting. To get through a door and onto a truck, the pockets, rails, felt, slate and legs come off, and the slate goes out in pieces.

Can the same hauler move my table to a new house instead?

That's a pool table mover's job, not a junk hauler's. Relocating a table includes reassembly and leveling the slate, and HomeGuide puts it at $300 to $800 on average. A hauler only takes the table apart and hauls it off; nobody puts it back together.

Can a coin-op table come out of a bar or rec hall?

Yes. Expect it to take a little longer than a home table, since tables with a ball return system are slower to take apart. Empty and unlock the coin box first, and tell the hauler the business hours so the work happens when the room is quiet.

Pool Table Removal in Winston-Salem, NC

Typical cost: one national junk-pickup service starts in-home pool table removal at $405.
Weight: 500 to 2,500 pounds for slate, 180 to 600 for a wood table.
Standard 8-foot slate table: about 1,000 pounds, which means a crew, not a couple of friends.
Teardown: moving guides price disassembly at $75 to $200 on its own.

Through Winston-Salem Junk Co., one local hauler gets the details of your table (size, slate or not, which floor) and prices the teardown and haul-away together. A pool table can't leave in one piece, so the quote should cover taking it apart, carrying the slate and clearing the room.

Pool Table Types a Hauler Takes Apart

Dated three-piece slate pool table with worn green felt in a carpeted basement rec room, rails removed and leaning on the wall

Three-piece slate tables

Many slate tables have a bed split into three sections, which HomeGuide notes makes them easier to move. Its weights by size:

7-foot slate: about 700 pounds.
8-foot slate: about 1,000 pounds.
9-foot slate: about 1,300 pounds.

The crew pulls the pockets and rails, peels back the felt, unscrews each slate section and carries them out one at a time. The frame and legs follow. In a basement rec room, every slate piece goes up the stairs on its own, so the stair count matters as much as the table size.

Lightweight wood pool table with a faded blue felt top in a garage, its legs already unbolted and stacked beside it

One-piece slate and non-slate tables

Cheaper tables skip the slate and use a wood or composite bed. HomeGuide puts wood tables at 180 to 600 pounds: about 275 for a 7-footer and 320 for an 8-footer. They come apart faster and price lower. A one-piece slate bed is the opposite case: it can't be split into sections, so it goes out as one heavy sheet with more hands on it. If you're not sure what's under the felt, check the paperwork or look at the bed from below and send a photo.

Coin-operated bar pool table with a ball return slot and coin mechanism on the end rail, set in an empty game room

Coin-op and bar tables

Coin-op tables add a coin mechanism and a ball return running inside the frame, and HomeGuide notes that ball-return tables take longer to take apart. When one comes out of a bar or a fellowship hall, the work has to fit around opening hours; for a bigger business cleanout, see commercial junk removal.

Gloved worker carrying an old wooden kitchen chair down brick porch steps toward a white pickup with another chair in the bed

Why Winston-Salem homeowners call Winston-Salem Junk Co.

Your request goes to a single independent hauler
Hear the all-in figure before anything is carried out
Calling is free; the hauler bills only the job you OK
Mention stairs, a gate code or a hot tub when you call

What Pool Table Removal Costs

Junk removal cost guides rarely list pool tables, so the useful numbers come from neighbors in the trade. One national online junk-pickup service starts in-home pool table removal at $405 and curbside at $400. Moving guides price disassembly alone at $75 to $200 (Angi), and a hauler is doing that work too. What moves the price:

Slate or not
Three slate sections add hundreds of pounds and more carrying than a wood bed.
Table size
By HomeGuide's figures, a 9-foot slate table is about 300 pounds heavier than an 8-foot one.
Landfill weight
Slate is dumped by the ton at Hanes Mill Road, so it costs more to get rid of than its size suggests (county landfill fees).
Stairs and turns
A basement or second-floor game room means carrying every slate piece up or down.

Before the Crew Arrives

Clear a work area
The crew needs room on every side of the table to pull rails and lift slate, plus a clear path to the door.
Take down the light
A hanging billiard light sits right where the slate gets lifted.
Pull what you're keeping
Cues, balls, the rack and the cover are easy to lose in the teardown.
Protect the floor
Ask whether the crew brings floor runners for the carry, especially over hardwood.
List the rest of the room
Bar stools, a dartboard or the old couch from the same rec room can ride on the same visit for less than a second trip.

See piano removal for the other heavy piece that won't fit through the door whole.