Winston-Salem Junk Co. logo
White stake-bed truck piled with an armchair, a rolled rug, a headboard, boxes and black bags, parked in front of a craftsman bungalow with autumn leaves on the lawn

Junk removal in Winston-Salem, NC

Exercise Equipment Removal in Winston-Salem, NC

  • Treadmills: about $150 to $300 to haul away; most weigh around 200 pounds.
  • Ellipticals: $100 to $250, at 150 to 250 pounds each.
  • Home gyms: $200 to $400 or more for a multi-station machine of 300 to 600 pounds.
  • Teardown: some haulers add $25 to $75 when a machine has to come apart to fit the door.

Winston-Salem Junk Co. points your call to a hauler with the dollies and hands for the treadmill in the basement or the cable machine in the spare room. Tell us the machine, roughly how big it is and where it sits, and the hauler sizes up the crew and the price before the visit.

Get a free junk removal estimate

Free for homeowners. One local contractor contacts you.

Exercise Equipment, Machine by Machine

Old folding treadmill with its deck raised and locked upright in an unfinished basement beside the stairs

Treadmills

Treadmills outweigh most other cardio machines. BarBend puts the average at around 200 pounds, with sturdier running models at 300 or more. A folding model goes out with its deck locked upright. A non-folding one may have to lose its console arms to make the turn at the top of the basement stairs.

Elliptical trainer with a cracked plastic shroud next to an upright exercise bike in a carpeted spare bedroom

Ellipticals and stationary bikes

An elliptical weighs 150 to 250 pounds and is awkward rather than heavy: long, with arms that swing. Pulling the handlebars and pedal arms makes it much easier to carry. Exercise bikes are the light end at 40 to 100 pounds. The same national guide prices them this way:

Machine Haul-away price
Elliptical $100 to $250
Stationary or spin bike $75 to $175
Rowing machine $75 to $150
Multi-station home gym with a cable tower and a stack of weight plates beside a padded bench in a garage

Weight benches and home gyms

A plain weight bench runs 50 to 150 pounds and $75 to $200 to remove. A multi-station home gym is another job entirely: 300 to 600 pounds or more, bolted to a tall frame with a cable and pulley system and a stack of plates. It almost always has to be unbolted, and the plates carried out separately. Loose dumbbells and plates are dense steel, so count them in when you call; a crate of plates outweighs most of the machine.

Gloved worker carrying an old wooden kitchen chair down brick porch steps toward a white pickup with another chair in the bed

Why Winston-Salem homeowners call Winston-Salem Junk Co.

  • Your request goes to a single independent hauler
  • Hear the all-in figure before anything is carried out
  • Calling is free; the hauler bills only the job you OK
  • Mention stairs, a gate code or a hot tub when you call

Get a free junk removal estimate

Free for homeowners. One local contractor contacts you.

What Changes the Price

The figures above come from a national cost guide's full-service averages, not a Winston-Salem survey. Within those ranges, the quote moves with a few things:

  • Where it sits

    A treadmill in the garage is a short carry. One in a basement or an upstairs bonus room means stairs, which means more time and sometimes a third person.
  • Whether it comes apart

    A machine that has to be unbolted to clear a doorway can carry a $25 to $75 disassembly charge.
  • How big the machine is

    An under-desk walking pad weighs 55 to 80 pounds and loads like a small appliance; a commercial treadmill at 250 to 400 pounds needs a crew.
  • How many machines

    A full home gym (treadmill, bench, rack and plates) costs more per trip but less per item than booking each piece separately.

Sell, Donate or Haul?

A working treadmill or bike can sell or go to a friend, and that's worth trying first. Donation is harder than it sounds: Goodwill can't resell exercise equipment that has been recalled, and charities set their own rules for large pieces, as the donation pickup page explains. A machine that doesn't run is mostly steel, with some aluminum and the copper in its motor. If you're clearing out other metal along with it, scrap metal pickup covers that kind of load.

Before the crew arrives, unplug the machine, lower and lock a folding deck, and clear a path wide enough for the frame. If a machine is attached to the wall or floor, say so when you call.

See pool table removal if the game room is going too.

Ready to get started in Winston-Salem?

Request a free estimate